TIGERFLEX
®
APEX LOG CABIN GENERAL INSTRUCTIONS
16
tigersheds.com 0113 205 4189 sales@tigersheds.com
Step 10:
BUILDING A WALL FOR A FULL PANE WINDOW
• Start with 274mm cut logs.
• Secure 274mm cut logs through notch into log below using 1x S40. Drill a pilot hole at an angle through the cut
log into the half log below and screw into place as shown using 1x S40.
(Detail E In Step 8 For Reference)
• Continue to build upwards. Secure built walls using 190mm spacers every ve logs
high using 2x S35.
(Detail H & H1 In Step 9 For Reference)
Use supplied construct diagram for reference.
To Next Page
Loading...
