tilgin HG351 - Connecting phones; equipment

10
4.6. Connecting phones / equipment
You can connect analogue phones and other equipment such as fax machines
to the home gateway. The home gateway will then turn these units into IP
telephony capable devices by performing translation between analogue
telephony services and IP based telephony services.
Mind that you might need a country specific phone plug and a special phone
cable (both supplied by your operator) to connect multiple analogue devices.
If your services do not include telephony, contact your operator.
Connecting a single analogue phone/equipment
Connect the devices to the phone port (#1 in chapter 3.2)
Connecting multiple analogue phones/equipment
All of the phones in your household can be connected to the home gateway
using a country specific phone plug and a special phone cable.
Each port can handle up to five devices in cascade. In this case, DO NOT
connect any of the home gateway phone ports to the phone socket on the wall.
Plug the special cable into the phone port (#1) and then into the specific phone
plug connected on the main phone socket on the wall.
DO NOT use an ordinary phone cable for this purpose. It requires a special
phone cable which can be different from country to country.
This option must be supported in your country and by your operator.