TiLite ZR - Page 9

OM_ZR_0913RevA
ZR Owner’s Manual
vii
DESK ARM WITH RIGID SIDE GUARD AND DESK ARM WITH RIGID SIDE GUARD AND
TRANSFER LOOP 5-2
Adjusting the Armrest Height 5-2
Removing 5-2
Replacing 5-2
SWING AWAY-FLIP BACK ARMREST 5-3
Adjusting the Armrest Height 5-4
Adjusting the Armrest Angle 5-4
CHAPTER 6: SIDE GUARDS 6-1
CLOTH SIDE GUARDS 6-1
Removing/Replacing 6-1
RIGID REMOVABLE AND QUAD REMOVABLE SIDE GUARDS
(Aluminum and Carbon Fiber) 6-1
Using Rigid Side Guards 6-1
Adjusting 6-2
Removing 6-2
Reinstalling 6-2
FOLD-DOWN RIGID SIDE GUARDS (Aluminum and Carbon Fiber) 6-3
Using Fold-Down Side Guards 6-3
Removing 6-3
Reinstalling 6-3
FENDERED CARBON FIBER SIDE GUARD 6-3
Using Fendered Side Guards 6-3
ADJUSTABLE FENDERED SIDE GUARD (Aluminum) 6-4
Mounting 6-4
Adjusting 6-5
CHAPTER 7: BACK UPHOLSTERY, SEAT UPHOLSTERY & SEAT CUSHIONS 7-1
VELCRO
®
-STYLE ADJUSTABLE BACK UPHOLSTERY 7-1
Adjusting the Tension 7-1
Replacing 7-1
TENSION ADJUSTABLE BY STRAPS BACK UPHOLSTERY 7-2
Adjusting the Tension 7-2
Replacing 7-3
CORBAC
®
ADJUSTABLE CONTOUR BACK SUPPORT 7-3
TENSION ADJUSTABLE BY STRAPS SEAT SLING UPHOLSTERY 7-3
Adjusting the Tension 7-3
Replacing the Upholstery 7-4
BOLT-ON SEAT SLING 7-4
Adjusting the Tension 7-4
Replacing the Upholstery 7-5
SEAT CUSHIONS 7-5
Replacing the Foam Insert in the TiLite Seat Cushion 7-5
VELCRO
®
-STYLE ADJUSTABLE SEAT BELT 7-5
Installation 7-6
Adjustment 7-6
Safety Check 7-6
Maintenance 7-6
CHAPTER 8: AXLE PLATES AND CAMBER PLUGS
(CENTER OF GRAVITY; REAR SEAT HEIGHT) 8-1
STANDARD CAMBER MOUNTS 8-1
Adjusting the Center of Gravity 8-1