• The display should now
show the correct time/day
of the week, for example;
Modifying the date and time of day
Normally the only change required will be
to the time of day minutes, in which case;
• Press and hold the Time button for
3 seconds, the word Hold will show
on the screen.
• After 3 seconds release the
Time button and the screen
will show the year;
• Press the Time button repeatedly until
the minutes are shown.
• Use Adv/Ovr or Boost to change the minutes
to the correct value.
• Press the Time button once to return
to operating mode.
Note: Other changes can be made the
same way, but the Time button must be
pressed to return to operating mode after
any changes. There is no automatic exit
from Time/date entry mode.
To Next Page
Loading...
Need help?
General
