If you are a guard company with corporate clients, add your clients first.
1. Select the Facilities tab to bring it to the front.
2. Right-click the Clients node.
3. Select New Client… The New Client Wizard will start. Follow the
instructions on the screen.
4. With the New Client Wizard, you can also enter information about
one or more facilities or groups for this client.
If you are a security department for a corporation or other organization, add your
facilities — sites or buildings — first. (It's a good idea to do this even if you only
have a single facility.)
1. Select the Facilities tab to bring it to the front.
2. Right-click the Facilities node.
3. Select New Facility… The New Facility Wizard will start. Follow the
instructions on the screen.
4. With the New Facility Wizard, you can also create new groups for
this client.
14
••
Add Clients or Facilities Installation Guide
To Next Page
Loading...