3 Windows Plug and Play
1. Turn on your computer.
2. After Windows starts, you should see a message indicating that Windows has
found a new hardware device. Windows will start the Add New Hardware
Wizard. Follow the instructions on your screen. (Note: Different versions of
Windows do this differently.)
3. If Windows does not automatically recognize the Downloader, click Start |
Settings | Control Panel | Add New Hardware, and follow the steps in the Add
New Hardware Wizard.
4. If Windows asks for a disk, use the Direct Downloader Driver Disk (floppy disk)
provided with your system.
4
••
Windows Plug and Play Installation Guide
To Next Page
Loading...