Adjusting the Display Brightness
1. This unit features the option of selecting either a bright or dim clock display. To set a bright clock
display, slide the Dimmer Switch, located on the back of the unit, to “Hi.” To set a less-bright clock
display, slide the Dimmer Switch to “Lo.”
Setting Clock Time
1. Slide the Alarm Set/Time Set Button to the TIME position.
2. Set the clock time using the
Fast Forward Buttonand theSlow Rewind Button. The best
method of setting the clock is advancing the time rapidly using the
Fast Forward Button until it is a few
minutes past the desired time, then using the
Slow Rewind Button to reach the desired time. To
reverse the time setting at a high speed, press and hold both buttons simultaneously. Remember to set the
correct AM or PM alarm time, as shown by the PM Indicator on the display.
3. After setting the time, slide the
Alarm Set/Time Set Button to the OFF position.
9
To Next Page
Loading...
Need help?
General
