Timex T300 - Setting the Clock Time and Calendar

Setting the Clock Time and Calendar
Important - While setting the Time or Calendar, if you do not press the © Hr./Mon or © Min/Date Buttons within
approximately 10 seconds, the display will stop flashing. If this happens you must press the © Time/
Cal. Button Once to enter the clock setting mode and Twice to enter the calendar setting mode.
1. Press the © Time/Cal. Button Once. The clock digits begin to flash.
2. Press the © Hr./Mon. Button to set the correct hour. Make sure you set the correct AM or PM. The PM
Indicator is located on the left side of the display.
3. Press the © Min./Date Button to set the correct time.
4. Press the © Time/Cal. Button. The date will begin to flash.
5. Press the © Hr./Mon. Button to set the correct month.
6 . Press the © Min./Date Button to set the correct date.
7. After the correct time and date are displayed, press the © Time/Cal. Button Once to exit the setting mode.
10