Timex T300 User Manual

Preset Station Memories
This radio has a total of 18 preset station memories (6 AM and 12 FM preset stations). To enter stations into memory
do the following:
1. Press the 0 On/Sleep Button Once to turn the power ON.
2. Press the © AM/FM/Sounds Button until the display changes to the AM or FM radio frequency you desire. The
AM or FM Indicator will appear on the bottom left side of the display.
3. Press the © © Up or Down Tuning Buttons to find the station you desire.
4. Press the © Memory Set Button Once while the station is displayed. The radio station digits will begin to flash.
5. While the digits are flashing, press the ©0 U P or Down Preset Buttons until you find the preset number you
want to store the station in. The Preset Station Numbers appear on the top right side of the display.
6 . Press the © Memory Set Button again, the station will now be set.
Important - If you do not press the ©© Up or Down Preset Buttons in Step 5 within 10 seconds, the station
frequency will stop flashing. Press the © Memory Set Button Twice and proceed to Step 5 again.
To preset more stations simply follow the steps above.
Recalling Preset Station Memories _
1. Press the © On/Sleep Button Once to turn the power ON.
2. Press the © AM/FM/Sounds Button until the display changes to the AM or FM radio frequency you desire. The
AM or FM Indicator will appear on the bottom left side of the display.
3. Press the ©© Up or Down Preset Buttons to find the desired preset station.
Changing Preset Stations
To change a preset station simply follow the instructions under Preset Station Memories and enter a new station
into the preset number you wish to change. The new station will be "remembered" and the previous station will be
"forgotten".
12

Timex T300 Specifications

General

Brand	Timex
Model	T300
Category	Clock Radio
Language	English