Timex T300 - Setting the Nature Sounds Alarm Time; Setting the Buzzer Alarm Time

Setting The Nature Sounds Alarm Time
Important - While setting the alarm times, the display will return to the current clock time if no button is pressed
within 10 seconds. You can exit the Setting Mode at anytime by simply pressing the © Alarm Set
Button repeatedly until the current clock time is displayed.
1 . Press the © Alarm Set Button until the Sounds Alarm Indicator flashes on the upper left side of the
display.
2. While the Sounds Alarm Indicator and clock digits are flashing, press the nature sounds button ©©©©
(Wind, Forest, Brook, Ocean) to choose the sound you wish to wake to.
3. Press the Hr./Mon. Button to set the correct alarm hour. Make sure you set the correct AM or PM. The
PM Indicator is located on the left side of the display.
4. Press the © Min./Date Button to set the alarm time you desire.
5. Press the © Alarm Set Button two times to return to the current time display.
6 . Press the © Sounds Alarm Button until the Sounds Alarm Indicator appears on the upper left side of the
display to confirm that Wake to Sounds is ON.
Setting the Buzzer Alarm Time
Important - While setting the alarm times, the display will return to the current clock time if no button is pressed
within 10 seconds. You can exit the Setting Mode at anytime by simply pressing the © Alarm Set
Button repeatedly until the current clock time is displayed.
1. Press the © Alarm Set Button until the Buzzer Alarm Indicator flashes on the upper left side of the display.
2. Press the © Hr./Mon. Button to set the correct alarm hour. Make sure you set the correct AM or PM. The
PM Indicator is located on the left side of the display.
3. Press the © Min./Date Button to set the alarm time you desire.
4. Press the © Alarm Set Button one time to return to the current time display.
5. Press the © Buzzer Alarm Button until the Buzzer Alarm Indicator appears on the upper left side of the
display to confirm that Wake to Buzzer is ON.
14