Timex T300 User Manual

Listening to Nature Sounds
1. Press the © On/Sleep Button Once to turn the power ON.
2. Press the © AM/FM/Sounds Button until the ((;sounds») Indicator appears on the bottom left corner of the
display.
3. Press any of the four nature sound buttons 0©©@ (Wind, Forest, Brook, Ocean).
4. Rotate the © Volume Dial to adjust the volume level.
5. Press the © Off/Reset Button to turn the power OFF when you are finished listening.
Important - Playing the nature sound of your choice will not affect the one that is set for the wake-up time.
Setting the Radio Alarm Time
Before you begin please note the following important information:
• While setting the alarm times, the display will return to the current clock time if no button is pressed within 10
seconds. You can exit the Setting Mode at anytime by simply pressing the © Alarm Set Button repeatedly until
the current clock time is displayed.
• Before setting the Radio Alarm Time, you must preset the radio station you wish to wake to, into the preset
memory (see Preset Station Memories).
1. Press the © Alarm Set Button until the Radio Alarm Indicator flashes on the upper left side of the display.
2. Press the © AM/FM/Sounds Button to choose the AM or FM band you desire. The AM or FM Indicators will
appear on the lower left side of the display.
3. Press the ©© Up or Down Preset Buttons to find the preset station you wish to wake to.
4. Press the © Hr./Mon. Button to set the correct alarm hour. Make sure you set the correct AM or PM. The PM
Indicator is located on the left side of the display.
5. Press the © Min./Date Button to set the alarm time you desire.
6 . Press the © Alarm Set Button three times to return to the current time display.
7. Press the © Radio Alarm Button until the Radio Alarm Indicator appears on the upper left side of the display
to confirm that Wake to Radio is ON. H o

Timex T300 Specifications

General

Brand	Timex
Model	T300
Category	Clock Radio
Language	English