11
Listening to Compact Discs
Repeat Play
• Press the Play Mode Button once to repeat the current track. The Repeat Indicator located on the left
side of the display will flash for Repeat mode. The track that is playing will repeat continuously until cancelled.
• Press the Play Mode Button twice for Repeat All mode. The Repeat indicator will stop flashing, indicting
Repeat All mode, and the entire disc will repeat continuously until cancelled.
• To turn off/cancel Repeat or Repeat All modes, press the Play Mode Button until the Repeat display
disappears.
Random Play
•Press the Play Mode Button 3 times to enter Random Play mode. The display will indicate Random
mode and all tracks on the CD will play once in random order.
Program Play
1. Press the Play/Pause Button then press the Stop Button. Press the Program Button to enter
Program Play mode.
2. Display will show “P01” indicating the first program track. Press the Forward/Minute or Reverse/Hour
Button within 8 seconds to select the first track you wish to play, then press the Program Button to store
the first track.
3. The display will show “P02” for the second program track and so on. Continue to program tracks as detailed
above. You can program up to 20 tracks in any order.
4. When you’ve completed programming the play sequence, press the Play/Pause Button. The PROG
icon will appear and the CD player will play tracks per your programmed order.
Notes:
• To play in programmed sequence again, press the Play/Pause Button.
• To erase the program, open the CD door or press the Stop Button while the PROG icon is flashing.
To Next Page
Loading...
Need help?
General
