Side 12
Connecting and Mounting DAB+ Antenna inside the car:
1. Stick the antenna film to the glass as indicate in the
diagram, gently applying pressure to remove any air
bubbles.
2. Remove the adhesive backing from the amplifier
block and stick to the window glass. Remove the
adhesive backing from the earth sheet on the
amplifier block and stick this to the metal of the A
pillar.
3. The antenna should be mounted vertically, not
horizontally.
4. Do not attach the DAB antenna over heating wires,
in a place that obstruct the driver's view, or in a
place that can experience interference from metal.
Cables must not be stretched so that they become
an obstacle to the operation of the vehicle airbags or
function.
To Next Page
Loading...