INSTALLATION MANUAL
MODEL : TIS-4PL-E66D
NETWORK 4 ZONE AMPLIFIER
10
www.tiscontrol.com
TIS CONTROL LIMITED
Wanchai, Hong Kong
TIS CONTROL PTY LIMITED
SA, AUSTRALIA
Copyright © 2023 TIS, All Rights Reserved
TIS Logo is registered trademark of TIS CONTROL.
All of the specification are subject to change without notice.
Connect to a USB Storage
Device
Connect to Audio Playback Device
To play music from a USB storage device,
simply connect a USB storage device
containing music les to the Zone’s USB port.
Connect the LINE IN, OPTICAL IN connectors in each zone or the LINE IN, COAXIAL IN, OPTICAL IN
connectors in the master input area to an audio playback device; this can be a CD player, portable music
player, or any device with an audio output that uses the same connector.
LINE IN in each zone is represented as Line in in the APP, while LINE IN in the master input area is represented
as AUX. Optical IN is represented as OPT1 in each zone, while Optical IN and Coaxial IN are represented as
OPT2 and COX in the master input area.
To Next Page
Loading...