INSTALLATION MANUAL
MODEL : TIS-4PL-E66D
NETWORK 4 ZONE AMPLIFIER
11
www.tiscontrol.com
TIS CONTROL LIMITED
Wanchai, Hong Kong
TIS CONTROL PTY LIMITED
SA, AUSTRALIA
Copyright © 2023 TIS, All Rights Reserved
TIS Logo is registered trademark of TIS CONTROL.
All of the specification are subject to change without notice.
RS232 Serial Port
Connect to Network
The TIS-4PL-E66D can only be controlled by connecting to a smart home control unit via an
RS232 serial port.
The Pass-Through port can be used to connect to another TIS-4PL-E66D for group control.
To add TIS-4PL-E66D to your home network, connect it to your router with a LAN cable.
You can connect another device to the same network by using the NETWORK OUT port.
To Next Page
Loading...