TIS TIS-4PL-E66D - System Requirements; Internet, Wi-Fi, and App Requirements

To Next Page

To Previous Page

INSTALLATION MANUAL

MODEL : TIS-4PL-E66D

NETWORK 4 ZONE AMPLIFIER

www.tiscontrol.com

TIS CONTROL LIMITED

Wanchai, Hong Kong

TIS CONTROL PTY LIMITED

SA, AUSTRALIA

TIS Logo is registered trademark of TIS CONTROL.

All of the specification are subject to change without notice.

▸

TIS-4PL-E66D contains 4 audio ampliers for you to connect to 4 set of stereo speakers. Each zone also

contains analog and digital audio outputs for you to use as audio source. You can easily play music from

online music services, your phone storage, NAS and other sources by using the WIIM app on your iOS

or Android device.

▸

- Amplication: Each zone can provide 50Wx2@8ohms (stereo mode) or 100W@4ohms (bridge mode)

▸

- Multi-room audio function: Play different songs in different rooms or same song in every room.

▸

- Easy network setup: Connect to your home network and it is ready to use.

▸

- Rich I/O interface: Each zone has separate digital input/output and analog input/output. There is also a

master source input that all zones can used at the same time.

High Speed Internet Connection:

TIS-4PL-E66D requires an internet connection in order to stream music from online music services and

receive rmware updates. Slower internet connections may cause performance issues.

Wireless Router:

To use the TIS-4PL-E66D, you must have a functional Wi-Fi network in your home, as the control APP on

your mobile device must be in the same network as the streamer.

Control APP-WIIM:

TIS-4PL-E66D can be controlled using our free WIIM app on any iOS or Android device that meets the

following minimum requirements:

Or Android from the following link: https://dln.bz/a/muzoplayer/3.1.11.210810

SYSTEM REQUIREMENTS