Titan Dynamics Eagle - Section 3: Required Build Materials

Titan Dynamics
Titan Dynamics Webpage
Visit our Facebook page
Join our Discord server
Page
15
of
28
Section 3: Required Build Materials
Spars needed:
•
(2) 8x1000mm tube (main wing spars)
•
(2) 4x500mm solid (wing leading edge support)
•
(2) 3x500mm solid (aileron and flap hinge)
•
(1) 4x420mm solid (horizontal stabilizer support)
•
(1) 3x420mm solid (elevator hinge)
•
(1) 4x150mm solid (vertical stabilizer support)
•
(1) 2x150mm solid (rudder hinge)
Recommended motor & prop:
•
16-19mm mounting pattern
•
BrotherHobby Tornado T5 640kv + APC 12x8E and 12x8EP
•
Brotherhobby Avenger 2816 620kv + APC 11x8E and 11x8EP
•
Gartt 3510 700kv + APC 12x8E and 12x8EP
•
10-12 inch propellers
Recommended electronics:
•
ELRS / Dragonlink / Crossfire
•
5.8ghz / 1.2ghz analog or digital (19x19mm camera)
•
Matek F405-WTE or similar flight controller running ardupilot (optional)
•
Matek M8Q-5883 GPS/Compass or similar (optional)
•
(2) 45A BLHeli ESC
•
(6) Emax ES08MAII servos
•
Battery: 6S4P 21700, 6S6P 21700, 4S10P 18650
Misc:
•
Polymaker Polylite prefoamed LWPLA
•
Polycarbonate or other high-temp filament for the motor mount
•
Medium CA glue
•
250x220x220 minimum size print bed
•
Control horns
•
M3 threaded inserts (max 6mm height)
•
M3 bolts of various sizes
•
6x3mm magnets