Titan Dynamics
Titan Dynamics Webpage
Visit our Facebook page
Join our Discord server
Page
24
of
28
Section 6: Final Setup & Tuning Tips
• Titan Dynamics strongly recommends the use of Arduplane for all our models. If
you encounter an issue in flight, the data logs Ardupilot creates are invaluable for
finding the root cause of any issue and increasing future chances of success.
• Give all control surfaces +- 25 degrees or more throw.
• Flaps are extremely effective on the Eagle, although 35 degrees of travel
downward is as much as the flaps should travel, otherwise it wants to nose down.
• CG is marked under the wing and should be adhered to within ±5mm.
• Add duct tape or other abrasion resistant material to bottom of the fuselage to
increase durability if landing on rough surfaces.
To Next Page
