Titan Implement, LLC 3 7000 Series Disc Harrows
(423) 334-0012 January 2022
Pre-Delivery Checklist
The Dealer should inform the Purchaser of this product of the Warranty terms, provisions, and procedures that are
applicable. The Dealer and Purchaser should review the contents of the Operation and Parts Manual including
safety equipment, safe operation and maintenance, review the Safety Signs on the implement (and tractor, if
necessary), and the Purchaser’s responsibility to train their operators in correct operating procedures.
• MOUNTED IMPLEMENTS: I have explained that Deectors, Guards, or Shields must be installed and
maintained in good repair, and that the operator is responsible for watching out for persons in the work area.
PRE-DELIVERY SERVICE
CHECK AND ADJUST OR LUBRICATE, AS REQUIRED
See Operation and Parts Manual for Details
Inspection Performed - Warranty and Safety Procedures Explained - Installation Complete
LUBRICATION
Grease All Zerks
IMPLEMENT
Review Procedure to Adjust Disc Harrow
Make Sure that All Hardware is Properly Tightened
ATTACHMENTS & INSTALLATION
Make Sure All Bolts, Pins, and Nuts are Properly
Installed and Tightened
I have thoroughly instructed the purchaser on the above-described equipment. This review included the Operation
and Parts Manual contents, equipment care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Dealer Rep. Signature_________________________________________
The above equipment and Operation and Parts Manual have been received by me, and I have been thoroughly
instructed as to equipment care, adjustments, safe operation, and applicable warranty policy.
Date__________________ Purchaser’s Signature_________________________________________
IMPLEMENT TO TRACTOR CONNECTIONS
Make Sure A-Frame Pivot and Links are Properly
Installed
Make Sure Lift Arms are Adjusted Equally
Complete All Pre-Operation Checks
SAFETY ITEMS
Make Sure Protective Shields are Properly Installed
Review Operation and Parts Manual (Supplied)
Make Sure Tractor PTO Shield is Installed
Make Sure S.M.V. Sign is Installed, if Needed
(Customer Supplied)
Cut Here to Remove Page or Make Copies of This Page
To Next Page
Loading...
