MAX 23 / 63
4. Safety Regulations
Intended use
Proper use of this pneumatic tool includes bundling, collecting and securing by mean of
strapping using steel straps. Packed goods such as section steel, tubes, coils, etc. are
suitable application examples.
The device was designed and built for safe operation during strapping.
The device is intended for strapping with steel packaging straps.
Possible misuse!
Strapping material must not be used for the hoisting of loads;
this strapping tool may only be used as intended and specified
above.
The use of plastic straps is not allowed with this device.
Warranty and liability
TITAN GmbH & Co. KG grants a guarantee of six (6) months for all strapping units
sold by it. Such guarantee covers all defects of which evidence can be given that they
result from faulty manufacture or material defects.
Wearing parts are excluded from the guarantee.
Warranty and liability claims are excluded, if they result from one or several of the following
causes:
Unintended use of the unit.
Incompetent mounting, commissioning, operation and maintenance of the unit.
Operating the unit with improper safety and protective installations.
Disregard of the instructions in these operating instructions.
Unauthorized structural alterations to the unit.
Faulty monitoring of unit components subjected to wear.
Incompetently performed repair works.
Alterations to the scope of supply with the aim to improve the product without notice.
To Next Page
Loading...
