Need help?Do you have a question about the Titan TS142 and is the answer not in the manual?
General| Brand | Titan |
|---|---|
| Model | TS142 |
| Category | Remote Starter |
| Language | English |
Details actions and operations for T85RC and T85SRC remote transmitters.
Procedure for programming up to four transmitter codes into the system.
Instructions to activate and disable Valet mode for system security.
Steps to reset the remote starter system to factory default settings.
Guide to entering and navigating the system's programming menus.
Configuration options for Menu 1, controlled by Button 1 of the transmitter.
Configuration options for Menu 2, controlled by Button 2 of the transmitter.
Configuration options for Menu 3, controlled by Button 3 of the transmitter.
Configuration options for Menu 4, controlled by Button 4 of the transmitter.
Detailed explanation of various settings within Menu 1.
Detailed explanation of various settings within Menu 2.
Configuration of park light and trunk outputs for various functions.
Enabling or disabling Titan-Secure alarm features.
Programming options for the rearm output wire.
Configuration for horn output, GWR, and starter disable functions.
Detailed explanation of various settings within Menu 3.
Settings for diesel engines, glow plug, and instant trigger input.
Configuration for remote starter run time and tachometer sensing.
Procedure for setting up the system for manual transmission vehicles.
Detailed explanation of various settings within Menu 4.
Programming auxiliary outputs for Blue/Green-Black and Red/White wires.
Process for learning the tachometer signal for engine RPM detection.
Setting up the wire loop for automatic vs. manual transmission operation.
Critical safety warning regarding manual transmission installation and loop tampering.
Procedure to put the system in 'Ready Mode' for manual transmission remote start.
Alternative methods for entering 'Ready Mode' via brake or park brake.
Steps and confirmations for remote starting manual transmission vehicles.
Interpreting park light flash codes for system diagnostics.
Detailed explanation of the function of each wire in the TS142 system.
To Next Page
