Titan TS142 - Park Light and Trunk Output; Car Alarm Features; Rearm Output Functions; Horn;GWR;Starter Disable Functions

Version 2.01 TS132/TS142/TS152 QIG
P
ARK LIGHT / TRUNK OUTPUT
M2-2-1 Flash Park light output will stay active for 30 seconds after the Unlock
button is pressed.
M2-2-2 Flashes Park light output becomes negative on the Red / White wire and
Trunk release output becomes positive on the White wire.
M2-2-3 Flashes No special functions with regard to Park light and Trunk
Outputs.
C
AR ALARM FEATURES
M2-3-1 Flash Titan Secure Alarm Features ON (Active or Passive arming and
locking controlled by M2-7)
M2-3-2 Flashes Titan-Secure Alarm Features OFF (Default): Turns off all car
alarm security features.
REARM OUTPUT FUNCTIONS
M2-4-1 Flash Rearm wire will Pulse after start, with lock, and shutdown.
M2-4-2 Flashes Rearm wire will pulse after start only.
M2-4-3 Flashes Rearm wire will pulse after remote start shutdown only
M2-4-4 Flashes Rearm wire pulses with lock, and after remote start shutdown.
NEGATIVE HORN HONK/GWR/STARTER DISABLE FUNCTIONS (ORANGE
WIRE
)
M2-5-1 Flash Starter Disable / Ground Out When ARMED.
Passive /Active controlled by M2-7 (Titan-Secure must be ON).
M2-5-2 Flashes GWR ± Ground Out When RUNNING with remote start.
M2-5-3 Flashes Negative Horn output 300mA (Default) (Timing and duration
controlled by M1-6).