Titan TS142 - Menu 2 Setting Details

Version 2.01 TS132/TS142/TS152 QIG
SPECIAL UNLOCK /LOCK FUNCTIONS
M1-4-1 Flash Unlock before start, lock after start and after shutdown.
M1-4-2 Flashes Lock pulse ONLY after remote start shutdown.
M1-4-3 Flashes IGN(+), ACC(+), and GWR(-) (White/Violet ONLY) pulse with
Unlock.
M1-4-4 Flashes No special Unlock or Lock functions.
CHIRP/HONK SETTINGS
M1-5-1 Flash Arm/Disarm and Start chirps Disable - Honks for Panic ONLY
M1-5-2 Flashes Arm/Disarm chirps Enable - No Honks for Start ONLY
M1-5-3 Flashes Arm/Disarm chirps Disable ± Honks for Programming and Panic
ONLY
M1-5-3 Flashes All Chirps Enable - Honks for all features.
CHIRP/HONK TIMING AND ALARM DURATION SETTINGS
M1-6-1 Flash 5ms Chirp/Honk timing with 30 second duration on alarm sounding
M1-6-2 Flashes 50ms Chirp/Honk timing with 60 second duration on alarm sounding
M1-6-3 Flashes 10ms Chirp/Honk timing with 30 second duration on alarm sounding
DATA
MODE
M1-7-1 Flash Setting if using an iDatalink module connected to Data Port
M1-7-2 Flashes Setting if using a Fortin module connected to Data Port
MENU 2 EXPLANATION
SAFETY START
M2-1-1 Flash Press Start button 2X within 3 seconds to activate remote start.
M2-1-2 Flashes Press Start Button 1X to activate remote start.