EasyManuals Logo

Titan TTHTP26 User Manual

Titan TTHTP26
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
TTHTP26
In more detail . . .
Spark plug
NOTE: For good performance, the spark plug must be properly gapped and
must be free of deposits.
Inspect the spark plug every 25 hours or before long-term storage over 30 days. Clean
or replace with a new one if necessary.
1. Unplug the spark plug wire (19) (Fig. 30).
2.
Loosen the spark plug anti-clockwise using the multi-tool (25) and remove it
carefully (Fig. 31).
30 31
25
19
3.
Check the spark plug for damage and wear. The
colour of the electrode should be light-brown.
4.
Remove the deposits from the electrode with a soft
wired brush. Avoid heavy cleaning of the electrode.
5.
Dry the spark plug with a soft cloth, if it is wet from fuel.
6.
Check the spark plug gap. It should be 0.6-0.7 mm
(Fig. 32).
7.
Replace with a new spark plug if either the electrode
or the insulation is damaged.
8.
tight and then lightly tighten it with the multi-tool (25).
NOTE: Do not over tighten the spark plug to avoid any damage!
9.
(19).
32
0.6-0.7 mm
Care and maintenance
5059340124346-TTHTP26-GB-V01.indd 32 18/9/2020 9:55 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Titan TTHTP26 and is the answer not in the manual?

Titan TTHTP26 Specifications

General IconGeneral
BrandTitan
ModelTTHTP26
CategoryTrimmer
LanguageEnglish

Related product manuals