Titanium Office Professional A3 - Checking the Laminator and Product Contents; First Use

24
OceProfessional A3
− Protect the laminator from direct sunlight.
− Never place the laminator on or near hot surfaces (e.g. stovetops,
heaters etc.).
− Ensure that the mains cord does not come into contact with hot
parts.
− Never expose the laminator to high temperatures (heaters etc.)
or to the eects of the weather (rain etc.).
− Never ll the laminator with liquid.
− Never laminate damp documents or organic objects (e.g. owers,
leaves etc.).
− Do not cut the laminating pouches into pieces before laminating
and do not in any case cut o the sealed edges from the
laminating sheets.
− Stop using the laminator if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Only laminate at room temperature (approx. 10–25 °C).
− Never insert metallic objects (e. g. paper clips, staples etc.) or
objects other than laminating pouches which are intended for
this laminator into the laminating pouch infeed slot.
− The laminator has vents. Never cover them with other objects
such as magazines, blankets or similar.
5. First use
Checking the laminator and product contents
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage the
laminator.
− Therefore, be very careful when opening.