32
www.titathink.com
Push notication
If the camera motion detection was enabled, The camera can push
notication to your iOS or Android smart device, when triggered by a action.
You can enable or disable this feature via "AnyScene".
On "AnyScene" camera list page, Click "Alarm Records" button will
get into camera alarm records list, here you can choose a camera to browse
the camera alarm events.
You also can click the button on the right of the camera, and click the "edit"
icon to enable or disable the push notication function.
The default setting of push notication is enable.
Motion Detection Parameters
Sensitivity.
This option is used to control the motion sensibility. It’s used
to represent an area detects the change of pixel. A larger sensitivity value
means to trigger an alarm more easily.
Threshold.
This option is used to control the motion sensibility too. But the
Threshold is master switch, the Threshold has the rst priority. It’s used to
represent the amount of 16 sensitivity. A larger threshold value means more
hard to trigger an alarm.
Tips:
Up the "Sensitivity" and lower the "Threshold" for more sensitive Motion
Detection.
Lower the "Sensitivity" and up the "Threshold" for low sensitive Motion
Detection.
Motion Detection Recording
If the camera motion detection was enabled, and the alarm recording was
enable, the camera can record a video to your storage device when triggered
by a action. Your storage device can be your MircoSD card,NAS device
or PC. How to set your storage device Please refer to the storage
section.
To Next Page
Loading...
Need help?
General
