titathink TT522PW User Manual

47
www.titathink.com
Video Stream setting
For iOS or Android smart Device
For Windows PC or Mac
On the "AnyScene" App, Select the camera, click "Edit" icon
→
"Advanced
seting"→"Video Quality" to congura video stream.
There are a number of video stream avaiable. You can congure for the
primary and an secondary video stream. Secondary stream is a lower
resolution than the primary stream. the default stream for smart device is
secondary stream. If you want your smart device view high resolution video
please enable "Primary(HD) Viewing".
[Primary Stream] High resolution video stream, click for setting.
[Secondary Stream] Low resolution video stream, click for setting.
[Primary(HD) Viewing] Enable it, your smart device will select the primary
stream as its video stream, you can view a high resolution video. Disable it
your smart device will select the secondary stream as its video stream, you
will get a low resolution video.
Stream Setup
click "Primary Stream" or "Secondary Stream" to congure the stream
parameters.
"Best", "Good", "Medium", "Poor" are stream quality. Depending on your
requirements, choose the right quality.
[Pre-Recording(Sec)] Prerecord for the video recording. It generally used in
the motion detection alarm recording for preventing something loss.
Get into camera advanced setting web page to set the video
stream via your computer. Please refer to previous chapter for how
to access camera advanced setting web page.
On the camera advanced setting web page. Click " Camera " and select
"Stream Setup".

titathink TT522PW Specifications

General

Brand	titathink
Model	TT522PW
Category	Monitor
Language	English