Need help?Do you have a question about the titathink TT520PW and is the answer not in the manual?
Instructions for using the AnyScene app on iOS and Android devices for camera management.
Guide to installing and using the CameraLive application on Windows PC or Mac.
Step-by-step guide for physically connecting the camera sensor, main unit, and router.
Instructions to download, install, and launch the AnyScene mobile application on your device.
Steps for adding your camera to the AnyScene app after installation.
Explains two methods for adding cameras: network search or scanning a QR code.
Steps to select a Wi-Fi network SSID and enter the password for wireless connection.
Guide to downloading and installing the CameraLive application on your computer.
Steps for adding your camera to the CameraLive software, including UID and discovery methods.
Instructions to access the camera's advanced web settings for Wi-Fi configuration.
Steps to scan for available Wi-Fi networks and select the desired one from the SSID list.
Step-by-step guide to connect the camera to a Wi-Fi network using the AnyScene mobile application.
Instructions to access advanced web settings for Wi-Fi configuration on a computer.
Steps for selecting a Wi-Fi network and entering the password through the web interface.
Guide for setting up motion detection zones and parameters using the AnyScene app.
Instructions for configuring motion detection settings via the camera's advanced web interface.
Steps to enable and configure alarm recording settings within the AnyScene mobile app.
Instructions for setting up alarm recording via the camera's advanced web interface using Task Management.
Instructions for inserting and using a MicroSD card for video storage.
Steps for formatting MicroSD cards to FAT32, required for camera compatibility.
Instructions for setting up the camera to store video directly to a NAS device or a PC.
Guide to adjusting video stream quality, resolution, and features using the AnyScene app.
Instructions for configuring primary, secondary, and mobile stream settings via the web interface.
Steps for inserting the 3G SIM card into the camera before configuring 3G network settings.
Details on setting up 3G dial-up, mode, APN, phone number, and user credentials.
Instructions for running a hardware test to verify the 3G module and SIM card functionality.
Guidance on testing camera operation via 3G network after successful hardware verification.
To Next Page
General