37
www.titathink.com
Storage(MicroSD card, NAS or PC)
The camera can store video, snapshort to your MicroSD Card ,
NAS Device, PC or work with your NVR.
Notes: 1, The MicroSD card is not included in package.
2. The camera support MicroSD card up to 128G.
3. Please choose High speed Class 4 MicroSD card or better.
4. The File System of the MicroSD card must be FAT32 format. If
your card File system is not FAT32 format, the camera will unable to
recognize, if you are not sure whether your card is FAT 32 format,
please format it into FAT32 through your computer or the camera.
5. When inseting the card, remember to power off the camera.
1. Store to MicroSD card(The default setting of
Storage is Store to MicroSD card)
Power off the camera and insert your MicroSD card into the camera
MicroSD card slot. and then power on again.The card can only be
inserted into the camera with the golden pins of the card facing down.
The sd card should not be forced into the sd card slot as this may
damage the camera.
Format your MicroSD Card
Please access the camera advanced setting web page to setup the alarm
recording via your computer or smart device. Please refer to previous section
for how to access camera advanced setting web page.
The camera can only recognize the MicroSD card which the le system
is FAT32, if you not sure whether your card is FAT32, please format it
into FAT32.
Here are two ways to format your card.
1, Format your card into FAT32 format with your computer.
2, Format your card into FAT32 format with the camera.
To Next Page
Loading...
Need help?
General
