Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
WARNING: For “PoE” input connection, use only with UL listed I.T.E. with “PoE” output. Description for
the “PoE” is intended to be connected to not exposed (outside plant) networks or equivalent statement in
installation instructions.
POWER RATING: 24VAC, 50-60Hz, 3.26A shall be supplied by power adapter. 55VDC, 0.93A shall be
supplied by “PoE” (802.3bt type 3 class 6).
NOTE: Explosion may occur due to disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery.
NOTE: The wiring of input terminal block should be installed by skilled personnel.
NOTE: Use wire size ranging from 16 to 24 AWG (and wire type: Cu) ONLY.
NOTE: The recommended tightening torque is 0.5 N-m.
NOTE: Use of controls or adjustments of performance or procedures other than those specified herein
may result in hazardous radiation exposure.
To Next Page
Loading...