Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
Meridiaan 32
2801 DA, Gouda
The Netherlands
Installation ManualPD950/PD980
5 System requirements
Before you access the camera via a web browser, make sure that you have a good network
connection and that the system requirements given below are met.
Minimum:
• Intel® CoreTM i5-2430M @ 2.4 GHz
• 4 GB RAM
Recommended:
• Intel® CoreTM i7-3770 CPU@ 3.4 GHz, 8GB RAM
• 8 GB RAM
Windows XP / Vista / 7 / 8 / 10 / 11
Microsoft Edge (Chrome based version)
Google Chrome
Mozilla Firefox
Safari
Opera
Microsoft Internet Explorer 11.0 (Caution: unsafe, requires
camera ActiveX component installation)
10Base-T (10 Mbps),
100Base-TX (100 Mbps), or
1000Base-T (1000 Mbps) operation
Web browser viewing:
• During normal use (without ActiveX control), your
browser may encounter problems showing video
feed, or show reduced frame rate. This is normal
and does not affect performance in your VMS client
• With Microsoft Edge, you can enable Compatibility
Mode via the browser settings. After this, show the
camera web page in Compatibility Mode to install
and activate its ActiveX control.
The ActiveX control will allow for the same streaming
performance as also found in your VMS client.
(Caution: unsafe, requires camera ActiveX
component installation)