TMB ProPlex IQ ONE 4 - RDM Functionality; Basics of HTP Merging; Basics of Easy-Merge; Limited Warranty

ProPlex IQ One user manual version 1.6.8 122216
12
RDM FUNCTIONALITY
ProPlex IQ One devices have RDM Functionality. Below are the RDM functions available in these devices.
TMB has many options for RDM control of your devices: ProPlex RDMigo and IQ RDM Manager Software;
ProPlex Striker; and ProPlex MasterFade. Additionally, ProPlex RDM Opto-Splitters and the ProPlex IQ
product range offer many means of RDM over DMX data distribution.
Main
Sensor Count
Patch
Name
Present value
Protocol selection
Address
Lowest value
Easy Priority
Highest value
Art-Net configuration mode
DMX refresh setup
Port configuration
B
ASICS OF HTP MERGING
When multiple streams of data are being sent to the IQ, the IQ will merge the data using the rule “Highest
Takes Precedence” (HTP). This means that if multiple sources are sending values to the same channel, the
highest value will be passed through to the IQ’s DMX Output. For example, if one console is sending a DMX
value of 127, and a second console is sending a value of 255 to the same channel, the higher value will
prevail.
B
ASICS OF EASY-MERGE
When multiple streams of data are being sent to the IQ, the IQ will merge the data via “Easy-Priority”. This
means that whichever stream is sending the highest value to channel 512, this will be the stream that takes
precedence.
L
IMITED WARRANTY
ProPlex Data Distribution Devices are warranted by TMB against defective materials or workmanship for a
period of two (2) years from the date of original sale by TMB.
TMB’s warranty shall be restricted to the repair or replacement of any part that proves to be defective and
for which a claim is submitted to TMB before the expiration of the applicable warranty periods.
This Limited Warranty is void if the defects of the Product are the result of:
• Opening the casing, repair, or adjustment by anyone other than TMB or persons specifically
authorized by TMB
• Accident, physical abuse, mishandling, or misapplication of the product.
• Damage due to lightning, earthquake, flood, terrorism, war, or act of God.
TMB will not assume responsibility for any labor expended, or materials used, to replace and/or repair the
Product without TMB’s prior written authorization. Any repair of the Product in the field, and any associated
labor charges, must be authorized in advance by TMB. Freight costs on warranty repairs are split 50/50:
Customer pays to ship defective product to TMB; TMB pays to ship repaired product, ground freight, back to
Customer.
This warranty does not cover consequential damages or costs of any kind.
A Return Merchandise Authorization (RMA) Number must be obtained from TMB prior to return of any
defective merchandise for warranty or non-warranty repair. For all repairs please contact TMB Tech Support
Repair using the contact information below or email TechSupportRepairNA@tmb.com.