Note:
1. If the device has went into AP mode, but the wireless function of the
device hasn’t been activated via “uCareHome” on the phone or user
doesn’t do any operate about the device, after 10 minutes the device will
automatically exit AP mode and returns to the previous connection mode.
2. If the monitor is in AP mode, user can through the menu “System->
Network->Exit AP mode” to choose it manually, the monitor will auto
reboot and it will exit AP mode.
Enter the menu “System->Network->Enter AP mode”, choose “Enter AP mode”,
it will automatically reboot and wait for all button LEDs flashing then AP mode
is ready.
Flashing
Monitoring
Unlock
Talk
1
2
Hang up
Make infoor monitor into AP mode
Wireless Network------Make indoor monitor into AP Mode
Language Time Information
Network Password
Return
Enter AP mode
Default setting
Default password
Return
Wireless Network------APP Operation for Android phone
Step4
Step5
Step6
Step1
Step2
Step3
If device hotspot appears, not your WIFI name,
please switch to your phone wifi setting and
connect 2.4Ghz WIFI, then return to first step,
try to configure WiFi via app again.
25
26
To Next Page
Loading...
Need help?
General