Toast Flex - Toast Flex + Toast Hub: Peripheral Connections; Connecting Cash Drawer and Guest Terminal; Setting Up Payment Devices

11
If you have a cash drawer, plug in the cash drawer cable,
which is grey with blue dots, from your cash drawer to
the printer.
If you have a wedge mount Toast Flex for Guest, plug the
green USB-C cable into the green port labeled “GFD” on
the Toast Flex terminal stand.
Toast Flex + Toast Hub
9
10
11
CONTINUED
Set up payment using one of the options below:
B
A
If you are attaching your Toast Tap (On-Counter)
to the Toast Flex, open the purple box labeled
“Payments.” This box contains your Toast Tap
(On-Counter). Follow the instructions in the printed
guide for Micro USB to Micro USB.
If you have Toast Tap (Direct Attach to Toast Flex),
this will already be adhered to your Toast Flex
terminal.
TIP
You can coil extra cable under the
Toast Flex for Guest connector bay.
Step 9
Step 10
Connector Bay
Wedge Mount
!
NOTE
If you are using the direct
attachment for Toast Flex for
Guest, this is already in place
on the Toast Flex terminal.
(See image on the right)
Direct Attach