EasyManua.ls Logo

TOHATSU BFT 80A - Fuel Tank and Tank Filter (Equipped Type)

TOHATSU BFT 80A
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
150
MAINTENANCE
4. Prime the engine using the priming
bulb (see page 76). Check for fuel
leaks. Repair any fuel leaks if
necessary.
If loss of power or hard starting is
found caused by excessive water or
sediment accumulated in the fuel
filter, inspect the fuel tank. Clean the
fuel tank if necessary.
Fuel Tank and Tank Filter
(equipped type)
Cleaning interval:
Every year or after every 200 hours of
outboard motor operation.
<Fuel Tank Cleaning>
Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death. Do
not smoke or allow flames or
sparks in your working area.
KEEP OUT OF REACH OF
CHILDREN.
• Always work in a well-ventilated
area.
• Be sure that any fuel drained
from the fuel tank is stored in a
safe container.
• Be careful not to spill fuel when
cleaning the tank and filter.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled, make
sure the area is dry before
starting the engine.
FUEL LINE
36ZZ0T030_EN.book Page 150 Tuesday, November 28, 2017 4:19 PM

Table of Contents