TOHATSU BFT 75A User Manual

EN
OWNER’S MANUAL
FR
MANUEL
DE L’UTILISATEUR
ES
MANUAL
DEL PROPIETARIO
DE
BENUTZERHANDBUCH
BFT 75A
90A

TOHATSU BFT 75A Specifications

General

Brand	TOHATSU
Model	BFT 75A
Category	Outboard Motor
Language	English

Summary

SAFETY

Safety Information

General safety precautions and operator responsibilities for safe operation.

SAFETY LABEL LOCATIONS

COMPONENT IDENTIFICATION

CONTROLS AND FEATURES (H type)

CONTROLS AND FEATURES (R type)

CONTROLS AND FEATURES (T type)

CONTROLS AND FEATURES (Common)

INSTALLATION

Transom Height

Selecting the correct outboard motor height for boat transom fitment.

Location and Installation Height

Proper placement and mounting height of the outboard motor on the boat transom.

Outboard Motor Installation Procedures

Step-by-step guide for physically mounting the outboard motor onto the boat.

Outboard Motor Angle Inspection

Checking and adjusting the outboard motor's trim angle for optimal performance.

Battery Connections

Instructions for correctly connecting the outboard motor's battery for power.

Remote Control Installation

Guidance on installing the remote control system for steering and throttle.

Propeller Selection

Guidance on choosing the appropriate propeller for optimal engine speed and performance.

PRE-OPERATION CHECKS

Engine Cover and Oil Checks

Procedures for removing engine cover and checking engine oil level before operation.

Propeller and Cotter Pin Inspection

Inspecting the propeller blades and cotter pin for damage or wear.

Tiller Handle Height/Angle Adjustment

Adjusting the tiller handle height and angle for operator comfort and control.

Steering and Control Friction Checks

Checking and adjusting steering and remote control lever friction.

Water Separator and Battery Checks

Inspecting the water separator and battery connections for proper function.

Other Pre-Operation Checks

Reviewing various items like fuel hose, controls, stern bracket, and tool kit.

STARTING THE ENGINE

Fuel Line Connection

Connecting the fuel lines between the tank and the outboard motor securely.

Fuel Priming

Procedures for priming the fuel system using the priming bulb before starting.

Engine Starting Procedures (H type)

Step-by-step guide to start the engine for H type controls.

Engine Starting Procedures (R type)

Step-by-step guide to start the engine for R type controls.

Engine Starting Procedures (R2, R3 types)

Step-by-step guide to start the engine for R2 and R3 type controls.

Emergency Engine Starting

Procedure for starting the engine using the emergency starter rope.

OPERATION

Break-in Procedure

Recommended steps for breaking in a new outboard motor for optimal performance.

Gear Shifting (H type)

How to shift gears (forward, neutral, reverse) using the H type control.

Gear Shifting (R types)

How to shift gears using the R1, R2, and R3 type remote controls.

Steering Operation

How to steer the boat using tiller handle or remote control.

Cruising (H type)

Operating the outboard motor for cruising with H type controls.

Cruising (R type)

Operating the outboard motor for cruising with R type controls.

Trimming the Outboard Motor

Adjusting outboard motor angle for optimal trim during operation.

Tilting the Outboard Motor (T type)

Tilting the outboard motor for shallow water or beaching with T type controls.

Engine Protection Systems

Explains warning systems for oil pressure, overheat, PGM-FI, and ACG.

STOPPING THE ENGINE

Emergency Engine Stop

Procedure for stopping the engine immediately in an emergency using the kill switch.

Normal Engine Stop (H type)

Steps for stopping the engine normally using H type controls.

Normal Engine Stop (R type)

Steps for stopping the engine normally using R type controls.

TRANSPORTING

Fuel Line Disconnection

Steps to disconnect the fuel line before transporting the outboard motor.

Transporting the Outboard Motor

Guidelines for safely transporting the outboard motor, including using engine hangers.

Trailering Procedures

Recommendations for trailering the boat with the outboard motor attached.

CLEANING AND FLUSHING

MAINTENANCE

Tool Kit and Emergency Parts

List of tools and parts supplied with the motor for maintenance and repairs.

Maintenance Schedule

Recommended service intervals for various engine components and systems.

Engine Oil Service

Procedures for changing and checking engine oil for optimal lubrication.

Spark Plug Service

Instructions for inspecting, cleaning, and replacing spark plugs for proper engine operation.

Battery Maintenance

Guidelines for handling, cleaning, and maintaining the outboard motor battery.

Lubrication Points

Identifying and lubricating all necessary points on the outboard motor.

Water Separator Maintenance

How to clean and maintain the water separator to prevent fuel contamination.

Fuel Filter Maintenance

Procedures for inspecting and replacing the fuel filter for clean fuel delivery.

Fuse Replacement

Steps for identifying and replacing blown fuses to restore electrical system function.

Propeller Service

Procedures for inspecting and replacing the outboard motor propeller.

Inspect After Operating

Post-operation checks including cooling water leakage and submerged motor inspection.

STORAGE

Fuel Storage Recommendations

Guidance on storing fuel and the outboard motor to prevent spoilage and damage.

Vapor Separator Draining

Procedure for draining the vapor separator for safe long-term storage.

Battery Storage

Instructions for safely storing the battery during periods of non-use.

Outboard Motor Storage Position

Proper orientation and securing methods for storing the outboard motor.

DISPOSAL

TROUBLESHOOTING

Warning System Troubleshooting

Diagnosing and resolving issues indicated by the overheat and oil pressure warning systems.

Other Warning System Issues

Troubleshooting steps for water separator, PGM-FI, and ACG warning systems.

SPECIFICATIONS

EC DECLARATION OF CONFORMITY CONTENT OUTLINE

INDEX