44
CONTROLS AND FEATURES (Common)
NMEA Interface Coupler
The NMEA2000 interface coupler
can provide information regarding
eng
ine speed, fuel consumption, and
various warnings to an existing
NMEA2000 network via an optional
interface cable. Contact your dealer
for more information.
Operating Hour Notification
System
This outboard motor engine counts
the numbe
r of operating hours since
the last periodic maintenance. When
the next periodic maintenance is due,
the engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed,
reset the hour counter by:
1. Stopping the engine.
2. Setting the gearshift at F or R.
3. Turning the ignition switch ON.
The buzzer will sound once.
4. Pressing the emergency stop switch
5
times within 20 seconds.
The buzzer will sound once when
the hour counter is reset.
Periodic maintenance is required
wh
en either the operating hours or the
time since last maintenance reaches
the prescribed limit. Therefore,
periodic maintenance may be
required based on the number of
months since the last maintenance
before the alert based on engine
operating hours displays (see
Maintenance Schedule on page 121).
Reset the hour counter whenever
maintenance is pe
rformed, whether
based on the time interval or the
number of operating hours.
To Next Page
