47
5. INSTALLATION
Improperly installed outboard
motor can result in the outboard
motor dropped into the water, boat
not able to cruise straight ahead,
engine speed not increase, and
much fuel consumption.
We recommend that the outboard
motor be i
nstalled by an authorized
TOHATSU outboard motor dealer.
Consult the authorized TOHATSU
de
aler in your area for the Y-OP (User
Optional Parts)/equipments
installation and operation.
Applicable Boat
Select the boat suitable for the engine
po
wer.
Engine power:
BFT75A : 55.2 kW (75 PS)
BFT90A : 66.2 kW (90 PS)
Power recommendation is indicated
on
most of the boats.
Do not exceed the boat
manufacturer’s power
recommendation. Damage and
injury may result.
Transom Height
Select the outboard motor which is
correct for the boa
t transom height of
your boat.
Type: T (Outboard Motor
Transom Height)
<when transom angle
is 12°>
L: 537 mm (21.1 in)
X: 664 mm (26.1 in)
To Next Page
