PRE-OPERATING PREPARATIONS40
6
ENOM00039-0
If outboard motor encounters an abnor-
mal condition of fault, the warning
buzzer will emit a continuous beep or
intermittent short beeps and the warn-
ing lamp (LED) will synchronize with the
buzzer and engine speed will be limited
(engine will not be stopped).
See next page for conditions which will
lead to an abnormal condition or fault.
ENOM00040-B
Location of warning buzzer and
lamp
Warning buzzer
RC model: Located inside the remote
control.
Multi-Function tiller handle model:
Located in the tiller handle. *Only for
30, 40, 50
Warning lamp (LED)
RC model: Located in the tachometer.
Multi-Function tiller handle model:
Located in the tiller handle. *Only for
30, 40, 50
1. Warning lamp
1. Warning lamp
5. Warning system
1
ENOF00851-0
To Next Page
