TOHATSU MD 40B2 - FUEL FEEDING

ENGINE OPERATION 45
7
1. Oil tank-Filter
2. Filter-Oil Pump
3. 75,90:Oil Pump-Cylinder Block (seven lines)
4. 115:Oil Pump-Cylinder Block (nine lines)
ENOM00044-B
ENOW00029-A
When opening fuel tank cap, be sure to fol-
low the procedure described below. Fuel
could blast out through the fuel tank cap in
case the cap is loosened by using another
procedure when internal pressure of fuel
tank is raised by heat from sources such as
sun light.
ENOW00947-0
When using a separate tank, be sure that the
fuel line is not kinked and is connected
securely.
1. Full open the air vent screw on the
fuel tank cap.
1. Air vent screw
2. Fuel tank cap
2. Connect the fuel connector to the
engine and fuel tank.
1. Fuel connector
2. Pull
3. Insert
1. Pull
2. Insert
2. Fuel feeding
WARNING
CAUTION
A
2
3, 4
1
ENOF00654-0
1
2
ENOF00027-B
1
2
2
2
3
3
ENOF01316-0
1
2
ENOF00861-A