TOHATSU MFS 25C - Safety Notices; Danger, Warning, Caution Levels

21-025 US
＜Digital Trim Sensor Setting＞
TOCS 4.3” LCD Display has been set the analog trim sensor as default setting.
Trim sensor setting requires to OFF manually on the display on all BFT models, and MFS 75-115A models that
digital trim sensor is installed.
1． Select SENSOR CONFIG.
Press ”ENTER”.
2. Select Resistive Pin 8.
Press “”ENTER”.
3. Select “Off”.
Press “ENTER”.
4. Beck to the menu with press “MENU BACK”.