TOHATSU MFS 25C Quick Reference Guide

21-025 US
＜Fuel Tank Sensor Setting＞
TOCS 4.3” LCD Display has been set up 3-180 Ohm sensor as default setting.
Fuel sensor setting requires manually on the display when other type of fuel level sensor is installed.
2． Select SENSOR CONFIG.
Press ”ENTER”.
2. Select Resistive Pin 9.
Press “”ENTER”.
3. Press “ENTER”,
4. Select “Fuel”.
Press “ENTER”.

TOHATSU MFS 25C Specifications

General

Brand	TOHATSU
Model	MFS 25C
Category	Outboard Motor
Language	English