ENGINE OPERATION 41
7
1. Main switch key
6. Turn the main switch key to START
position and release the key when
engine has started. Also, confirm
warning lamp light up with buzzer
sound and then go off. The key
returns to the original position auto-
matically.
1. Warning lamp
ENOW00032-1
Do not hold turning starter motor more than
5 seconds, or the battery may be consumed,
potentially making the engine starting
impossible and/or damaging the starter.
If cranking over 5 seconds fails to start
engine, return main switch to “ON”, and
crank engine again after 10 seconds or more.
7. Check the cooling water from cooling
water check port.
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1. Stop switch lock
CAUTION
To Next Page
Loading...
Need help?
General
