TOHATSU MFS 25C User Manual

61
9
ADJUSTMENT
ENOM00073-0
Tiller handle type
ENOW00074-A
Do not overtighten the steering friction lever
it could result in difficulty of movement
resulting in the loss of control causing an
accident and could lead to severe injury.
Adjust this lever to achieve the desired
steering friction (drag) on the tiller han-
dle. Move lever towards (A) to tighten
friction and move lever towards (B) to
loosen friction.
1. Steering friction lever
2. Lighter
3. Heavier
ENOM00074-A
ENOW00074-B
Do not overtighten the throttle adjustment
screw or it could result in difficulty of move-
ment resulting in the loss of control causing
an accident and could lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
1. Throttle friction adjustment screw
2. Lighter
3. Heavier
1. Heavier
2. Lighter
3. Throttle friction adjustment screw
ENOM00075-0
ENOW00074-C
Do not overtighten the remote control
throttle friction adjustment screw or it
could result in difficulty of movement
resulting in the loss of control causing an
accident and could lead to severe injury.
To adjust the friction of the remote con-
trol lever, turn the throttle friction
adjustment screw on the front of the
remote control. Turn clockwise to
increase the friction and counter-clock-
1. Steering friction
WARNING
2. Throttle grip friction
WARNING
1
2
3
ENOF00910-0
3. Remote control lever friction
WARNING
1
3
2
ENOF00911-0
2
1
3
ENOF00238-0

TOHATSU MFS 25C Specifications

General

Brand	TOHATSU
Model	MFS 25C
Category	Outboard Motor
Language	English