MAGLINK LX
Configuration Manual | "Admin" Pages
Rev. 09,
– April 2016
Page 21 of 28
8.7
Shift report
The following image shows the "Shift report Page":
The table shows the start and end of each shift report, select the "Day" and "Tank" values.
You can establish an automatic scheduling of the shift report. From the "Time" drop-down list select one of
the options then press the "Add schedule" button.
To delete a schedule select from the "Shift Schedule" drop-down list a schedule and press the "Delete
selected" button.
The button allows you to download the "Shift report" in an Excel file in CSV format.
8.8
Dispenser Configuration
The following image shows the "Config. Page": Dispensers":
When the console is connected to an FCC or POS enabled for reconciliation configure the dispensers and its
nozzle’s associating them to the tanks from which they connected. For each dispenser you must define the
number of nozzles and the tank it is connected to. Select from the "Dispenser" drop-down list the
dispenser, to configure select the number of nozzles connected from the "nozzle" drop-down list, finally for
each nozzle select the corresponding tank.
8.9
TCP/IP Connection
The following image shows the "TCP/IP Page":
You can access the TCP/IP parameters of the console:
• Address: IP address and communication port to communicate with the configuration application via
a browser (Internet Explorer, Mozilla Firefox, Google Chrome, Opera, etc.)
• Netmask
To Next Page
Loading...
