MAGLINK LX
Configuration Manual | Login Procedure
Rev. 09,
– April 2016
Page 5 of 28
3
I
NTRODUCTION
This manual has been prepared in accordance with IEC 82079-1 standards “Preparation of instructions for
use - Structuring, content and presentation - Part 1: General principles and detailed requirements” and
according to the ATEX Directive 94/9/EU concerning equipment and protective systems intended for use in
potentially explosive atmospheres.
The manual provides necessary information on using a Maglink LX console.
The following table lists the symbols used in the document:
Symbol Description
ATTENTION: Important information and notes regarding operations and use
considerations
IMPORTANT: Danger to persons (including death), to property or to the
environment
The following table lists reference data of the manufacturer:
Data Description
Name START ITALIANA S.r.l.
Address
Via Pola 6
20813 Bovisio Masciago (MB)
Italia
Telephone +39 0362 1581465
Fax +39 0362 1581464
Website www.startitaliana.it
e-Mail support@startitaliana.it
ATTENTION: This manual must be used in conjunction with the following manuals:
• Installation manual
• User Manual
In order to use the console as described below in this manual, you must have installed the
consoles as per installation manual and use the console as per the user manual
ATTENTION: This manual must be used in conjunction with safety instructions:
IMPORTANT: Console installation should be performed by qualified personnel, as shown in
the Installation Manual and according to safety instructions
To Next Page
Loading...
