MAGLINK LX
Configuration Manual | Login Procedure
Rev. 09,
– April 2016
Page 6 of 28
The Maglink LX console complies with the requirements of Directive 2012/19/EC on waste of electrical and
electronic equipment (WEEE) and hence displaying the according symbol:
IMPORTANT: The crossed out wheelie bin symbol indicates that the product must be
disposed at the end of its useful life with household waste and must be brought to a
collection point for electrical and electronic equipment
ATTENTION: The units of measurement contained in this manual refer to a specific choice by
the user himself/herself. You can set the measurement units in a different way (see Section
6.1 of this manual)
The Web Console Config is a web application installed on Supra Linux Apache Web Server operating system
distributed with each MagLink LX. The web application is designed to configure and set parameters in the
console. In addition, you can also display a variety of information:
The status of all connected tanks
The data on the shift report
Historical data collected
Reconciliations
Current and previous alarms
Delivery and losses
To access the application you must know the IP address of the console (default: 192.168.1.209) and type it
into a browser (for example, Mozilla Firefox, Google Chrome, Internet Explorer, etc.).
The following figure shows the home page of the Web Console Configuration:, as a first step, you need to
select the display language:
The possible display languages are as follows:
Bosnian Czech Hungarian (Magyar) Romanian Slovenian
Bulgarian English Italian Russian Spanish
Chinese Simplified, Chinese
Traditional
French Polish Serbian (Cyrillic and Latin) Turkish
Croatian German Portuguese Slovakian Ukrainian
After selecting the language, press the "Select" button and the application displays the login page.
To Next Page
Loading...
