Page 5-10 Document Ref 942005-001 Rev 2
TQP-HS for Fuel Dispensers Component Technical Manual
5.2 Frequently Used Spare Parts
5.3 References to Specific Tools
Reference Description
902373 Pump pulley SPA 150
901321-002 Key A6 x 6 x 30 for motor and pump pulleys
900050-027 O-ring Viton Ø 4 x 120 for filter box cover
900050-002 O-ring Viton Ø 4 x 34 for outlet flange of PAS
901614 Paper filter 12 µm Gasoline (according to country specification)
901613 Paper filter 25 µm Diesel (according to country specification)
901612 Cleanable plastic filter 90 µm mesh, all fuels.
900028-004 V-belt A29/13 13A760MC used in Quantium T with 95 mm pulley
900028-005 V-belt A27/13 13A720MC used in Quantium T with 71 mm pulley
* * * * * * * * * With V-belts always: check code on V-belt before ordering
902324 Tool for disassembling outlet insert
9231221014 Filter box cover for pressure measuring (vacuum)
9231221013 Filter box with pressure point before foot valve
9508012519
Flexible extension (male/female) M10 x 1.00 for pressure
measurement
SR Manometer (-1 to 3 bar) to measure pressure or vacuum
SR Torx key (shape T30)
902325 Tool for mounting lip-seal
902327 Tool for mounting outlet valve seat
902328 Vortex remover
Note : remove from the front of the pump to the back
SR:
Tools from local stores.
To Next Page
Loading...