Load Compensators
The Load Compensators are located between the rear trailing arm and the vehicle frame, one on each side.
When carrying a heavy load that effects the ground clearance, or if you are unsure of the load mass, inflate both load
compensators to 150 psi (10 bar) using an air compressor. If, when fully loaded, the rear of the vehicle sits too high,
release equal amounts of air from both compensators until the vehicle is level. To release air from the compensators,
depress the center pin of the Schrader valve with a pointed object.
An indication of proper use of the compensators is to ensure that the vehicle height, once loaded, is the same
as the vehicle height when empty.
To Next Page
Loading...