Windshield wiper operation
a. Move the lever down 2 positions to start wipers operation in low.
b. Move the lever down 3 positions to set the wipers to high.
c. With fingers behind the lever, pull up on the lever to operate the washer motor.
Lights / Horn / Signal control
Multifunctional handle controls the following:
a. Shift handle up, right signal blinks. (2)
b. Shift handle down, left signal blinks. (2)
c. Turn handle forward once to switch on side lights. (6)
d. Turn handle forward twice to switch on headlights. (5)
e. Pull handle backward, switches to high beam. (4)
f. Push handle toward steering wheel activates horn. (1)
NOTE:
The ignition switch key must be in the “ON” position to operate the headlights.
The multifunctional handle will not return automatically to its original position on low-turning angle of the vehicle.
To Next Page
Loading...